 |
 |
 |
 |
 |
 |
 |
 |
 |
Our decorative window film can be used for shop fronts, glass office partitions, or any situation where the look of sandblasted or acid etched glass will enhance appearance.
Maybe you would like a specific design for your patio doors, or perhaps a company logo for your office entrance. Whether your requirements are large or small, we're here to help.
1 Vector image file -- this is by far the best method, as little preparation is needed before we can cut the vinyl window film.
2 Raster image file -- this would require us to create a new vector drawing based on your artwork.
3 Paper based artwork - preferably this should be A4 in dimension, and would also need to be converted to a vector drawing.
It’s important to consider which parts of the drawing represent the see through cutouts, and which parts represent the obscure frosted window film. To do this, just create a two tone drawing like the example below.
Before providing an accurate quote, we'll need to see your artwork first. This is so we can assess it’s complexity and suitability.
If you are able to provide artwork in a vector graphic format, then there are no additional charges. You will only need to pay for the frosted film itself.
Additional charges apply if we need to convert your raster or paper based artwork, into vector artwork. This because we'll need to re-create your artwork by hand.
Vector to raster conversion costs between £12 to £36 depending on complexity. The example above is simple to re-draw, and would therefore cost £12.
Unlike our 'off the shelf' designs, which can be delivered the next working day. Custom made window film, will take approximately 2-3 working days. If your deadline is tighter than this, then give us a call, because we may be able to help.
How to send us your artwork:
| By E-mail: |  |
| By post: | Window Film Factory PO Box 3 Plymouth PL4 8WU |
| By Fax: | By Fax: 01752 294 827 |
 |
 |
White indicates a cut-out
The window film in place
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |